programming 8 thymio from 8 different pcs with vpl http://aseba.wikidot.com/forum/t-10841461/programming-8-thymio-from-8-different-pcs-with-vpl Posts in the discussion thread "programming 8 thymio from 8 different pcs with vpl" - programm each thymio independently Sun, 09 Aug 2026 14:08:12 +0000 http://aseba.wikidot.com/forum/t-10841461#post-4200915 Re: programming 8 thymio from 8 different pcs with vpl http://aseba.wikidot.com/forum/t-10841461/programming-8-thymio-from-8-different-pcs-with-vpl#post-4200915 Fri, 29 Mar 2019 14:39:34 +0000 riedo 875981 Hello,

if you want to use 8 wireless thymio in parallel, they need to have each a different network identifier. If Thymio VPL give you an error message, it means that several robots have the same network id.
When you do the network configuration, please make sure you label the dongles to not mix them, and configure one robot at a time (the others are off and their dongles unplugged). Give each robot a network id (for example 0x0001, 0x0002, …, 0x0008). Do not change the node id. Divide the robots among the 3 channels as a precaution to avoid interference, though having them all on the same channel is not the cause of your problem.

Kind Regards

]]> http://aseba.wikidot.com/forum/t-10841461#post-4200095 programming 8 thymio from 8 different pcs with vpl http://aseba.wikidot.com/forum/t-10841461/programming-8-thymio-from-8-different-pcs-with-vpl#post-4200095 Thu, 28 Mar 2019 18:57:43 +0000 ngeo23 5263955 hello, we have 8 thymio wireless and we want to programm each one independently from 8 pcs. I have done the thymio wireless configuration but when i open thymio vpl, on the second pc, an error shows that it cannot connect more than one thymio. Each one run great the pre-installed activities.Have you got any experience? can anyone assist? should i give different channel or node identifier to each one? thank you

]]>